Products

The CLD1-CB is supplied for counter loop applications with a boundary microphone, a preformed loop, power supply, and instructions.Ampetronic's CLD1 is the smallest and highest performance amplifier in its class measuring only 128 x 74 x 35mm and with an output current of 2.4A RMS.Designed and built to the high...

The CLD1-CD is supplied for counter loop applications with a desktop microphone, a preformed loop, power supply, and instructions.Measuring only 128 x 74 x 35mm and with an output current of 2.4A RMS, the CLD1 is the smallest and highest performance amplifier in its class.Designed and built to Ampetronics high...

CLS1, from Ampetronic, is a wall-mounted Induction Loop Amplifier for use with a perimeter induction loop. Based on room perimeter dimensions the area coverage is up to 200m². The amplifier has a tamper-resistant, hinged and detachable lid to protect and secure the connections and controls. The physical dimensions are 200mm x 200mm x 44mm. There are three independent inputs...

CLS2, from Ampetronic, is a wall mounted Induction Loop Amplifier for use with a perimeter induction loop. Based on room perimeter dimensions the area coverage is up to 400m².  The amplifier has a tamper resistant, hinged and detachable lid to protect and secure the connections and controls. The physical dimensions are 200mm x 200mm x 44mm. There are three...

The CMR3 calibrated receiver is designed for measuring the performance of audio induction loop systems. The audio output is within ±0.25 dB over the frequency range and where used with a suitable audio analyser, the frequency response and field distribution of the magnetic field from any audio induction loop system...

Ampetronic Flat Copper Tape is a flat foil cable that is 18mm wide on a reel size of 100m. The copper foil of 0.1mm thick and covered in a bonded Polyester film with a total thickness is 0.25mm. Used for forming induction loops under carpet, vinyl, wooden boards, and on top of concrete....

Ampetronic Flat Copper Tape is a flat foil cable that is 18mm wide on a reel size of 50m. The copper foil of 0.1mm thick and covered in a bonded Polyester film with a total thickness is 0.25mm.  Used for forming induction loops under carpet, vinyl, wooden boards and on top of concrete. Ampetronic adhesive warning tape...

The FSM is an ergonomically designed handheld meter providing an ease of use solution for measuring, setting up and commissioning an induction loop system to the requirements of IEC60118-4. The meter has three calibrated operational modes for the assessment of Background Noise, Field Strength and Frequency Response that are required to ensure...